BYD ATTO 3 2022, Owner'S Manual

Page: 168 / 201

167
MAINTENANCE
07
• To reduce adhesion, apply silicone
lubricant to all door seals and body wax
to the painted surface where the door
seals meet.
• Cover the body with a breathable
covering made of a "porous material"
such as cotton. Non-porous materials,
such as plastic sheeting, can build up
moisture and damage the paint.
• If possible, start the vehicle regularly
(preferably monthly). If the vehicle has
been parked for a year or more, go to a
BYD authorized dealer or service provider
for comprehensive maintenance.
Hood
Opening the Hood
1. Pull the handle twice and the hood will
unlock and open slightly.
2. Open the hood: Lift the hood and
support it with the rods.
3. Close the hood: When closing the hood,
lower it to about 30 cm above the front
grille and release it, so the fall locks it.
4. After closing the hood, check that the
latch is securely locked.
REMINDER
•Confirm that the hood is closed and
locked securely. Otherwise, while
driving, the hood may suddenly open
and cause an accident.
Cooling System
• It is required that the liquid level should
be between the MAX and MIN marker
lines of the auxiliary refrigerant radiator.
• The refrigerant should always be of
the same specification as the original
refrigerant, without adding any mixture.
Different brands and types of refrigerant
should not be mixed.
• If the level is below the MIN line,
refrigerant should be refilled to the
MAX line. Check the cooling system for
leakage.