BYD ATTO 3 2022, Owner'S Manual

Page: 142 / 201

141
06
IN-CAR DEVICES
Function Definitions
AUTO Mode button AUTO Mode button
• After tapping on this button, its indicator
lights up on the front A/C panel, and
compressor status, air amount and
blowing modes can be adjusted
automatically.
• The vehicle will exit AUTO control if air
amount and blowing modes are set,
and other functions will remain in AUTO
mode except for the operation function.
A/C ON/OFF button A/C ON/OFF button
• Tap on this button to disable the A/C if it
is ON.
• Tap on this button to enable the A/C if it
is OFF.
Max Cooling button Max Cooling button
• Tap on this button to activate the Max
Cooling control, and the compressor is
started, the temperature is Lo, the air
amount is adjusted as Max, the internal
circulation is started, and the blowing
mode is face level mode.
• Tap on this button again to exit.
A/C Cooling button A/C Cooling button
• To activate the A/C compressor, tap on
this button and the compressor starts to
work for cooling.
• Tap on this button again to deactivate
the function, and the compressor stops
working.
Internal/external circulation button Internal/external circulation button
• Tap on this button, the icon is displayed
as , and the air inlet mode will be
internal circulation.
• Tap on this button again, the icon is
displayed as , and the air inlet mode
will be external circulation.
REMINDER
•When the parking automatic internal
circulation is enabled, to ensure air
quality in the vehicle and prevent
the vehicle exhaust from entering
the vehicle, the circulation mode
will switch to the internal circulation
when parking.
Ventilation button Ventilation button
• Tap on this button to activate A/C
ventilation control, and the outlet air will
be natural air.
• Tap on this button again to exit.
Temperature regulation Temperature regulation
• A/C temperature regulation
• Tap on the upside arrow or slide it
down to increase the temperature. Tap
on the downside arrow or slide it up to
lower the temperature.
• When the temperature is set to the
lowest, L0 is displayed. When it is set
to the highest, HI is displayed.
Defrost button for front windshield Defrost button for front windshield
• Tap on this button to activate the front
windshield defrosting button indicator
on the front A/C panel and enable the
front windshield defroster control mode,
and the air supply mode is changed to
front windshield defroster mode.
• Tap on this button again to deactivate
and exit the front windshield defroster
control mode.
Defrost button for rear windshield & side Defrost button for rear windshield & side
mirrors* mirrors*
• Tap on this button, and the heating
panel in side mirrors will quickly clear
the side mirrors. It will be automatically
disabled after 15 minutes if there are no
other commands.