9
Both red and black wire are connected to the speaker (output: 100V/COM), and
please n or -. However, the speaker must
be equipped with
an
autotransformer; otherwise it might be damaged.
2.
Remote Decoder (WMP-60) is attached to the outside.
※
Note
The connection applies to any kind of high speakers. (Chart 3)
1. Parallel connection and color management is applied. Simply connect green to
green, white to white, blue to blue, red to red…etc.
2. Users are able to connect external speakers (ceiling speakers, horn
speakers…etc.), simply connect both red and black wires (Fig. 4) to the
speaker’s output autotransformer (there is no difference between cathode and
anode)
Fig. 3 external WMP-60
Summary of Contents for WMP-2100
Page 14: ...13 b WMP 60 200 zones DIP switch chart ...
Page 23: ...22 X System Structure ...
