BXB Electronics WMP-2100, Installation Manual

Page: 3 / 23

2
Safety Instructions
1. Please read and observe these instructions before installing and using the
apparatus.
2. Use only accessories specified by the manufacturer. The manufacturer is not
liable for damage caused by the use of non-specified accessories.
3. Install the apparatus and its accessories carefully. Strike and fierce shaking may
damage the apparatus.
4. Make sure the power cord is fixed properly.
5. Do not overload wall outlets and extension cords as this can result in a risk of fire
or short circuit.
6. To reduce the risk of damage from lightning strikes, it is important that all electric
cables should be bonded to the same grounding point.
7. Do not block any ventilation openings to prevent overheating and malfunction.
8. Do not expose the apparatus to rain or moisture.
Humidity may lead inside components to damage. Appropriate shelter is
necessary when placing it outside (Best working environment: Temperature 0°C
~ 40°C <32°F ~ 104°F>, humidity below 90%).
9. Please do not switch on and off the apparatus rapidly.
Rapid switch on and off the apparatus should be avoided all the time to prevent
inside sensitive electronic circuits from being damaged by surges.
10. Do not clean the apparatus and its accessories with chemical solvents. Use only a
clean, dry/dampish cloth.