BWT STARDECK INEO Installation And Maintenance Instructions Manual Download Page 29

Page: 29 / 56

PROTECTION & SAFETY

2021/07 - Version: C - Code : 34681

Installing the fasteners

The fastener straps are already attached to the first two slats of the cover apron.
Attach the fastener frame (1) to the wall opposite the axle exactly opposite the fastener straps

using the pozidriv countersunk screws ST 5.5 x 50. Position the fastener frame such that the

arrow markings coincide with the water level. In the case of liner or reinforced membrane

pools, do not forget to insert the fastener gasket between the fastener frame and the

membrane.

2.8.2.

Sub-coping mounted safety fastener

Sub-coping mounted safety fasteners are compatible with thin walled and polystyrene block prefab pools.

Version with trim

Ref

Description

Qty

Fastener frame

SS plate

SS support bracket

Fastener gasket

Upat M8x50 bushing

Countersunk hex socket

screw M6x20 A4 SS

Countersunk hex socket

screw 8x20 A4 SS

Z 6 A4 SS washer

H 6 A4 SS nut

10 Stainless steel slide bar

11 Trim

12 Fastener strap

Stainless steel version

Ref

Description

Qty

Stainless steel clasp

Stainless steel support

bracket

Frame gasket

Upat M8x50 bushing

Countersunk hex socket

screw 8x20 A4 SS

Countersunk hex socket

screw 8x20 A4 SS

Fastener strap

Summary of Contents for STARDECK INEO

























































Search results

Summary of Contents for STARDECK INEO

Reviews:

Related manuals for STARDECK INEO

Brands by name

Popular brands

BWT STARDECK INEO, Installation And Maintenance Instructions Manual

Search results

Summary of Contents for STARDECK INEO

Reviews:

Related manuals for STARDECK INEO

Brands by name

Popular brands