EN
12
5.7
Reg. Settings
5.7.1 Information in Reg. Settings
The capacity between each regeneration is
shown
in ”capacity/ Filter”.
5.7.2 Functions in Reg. Settings
-
Change the times in the regeneration
sequence.
-
Define the hardness of the raw water
-
It´s possible change between °dH, °fH
and ppm CaCO3.
-
The capacity in the Ion exchange
resin (preconfigured to 2.8 m
3
)
Password (See chapter 5.13)
5.8
Alarm
5.8.1 Information in Alarm
See all active alarms by pressing the “Alarm”
button in the top right corner. If an alarm
appears, the alarm button will blink. The
alarm will show date and time when it
occurred.
Reset alarm by pressing “Reset”
