The screen returns to the default display 5 seconds after the key was pressed for the last time.
The underwater light intensity setting sequence is as follows :
"strong light" display: 100% light intensity; the LED turns red. If the underwater light(s) were off,
one press will activate this mode.
"medium light" display: 66 % luminous intensity; the LED turns orange
1 press
2 successive presses
1 press
"Low light" display: 33 % luminous intensity; the LED turns green
3 successive presses
1 press
"light setting" displayed for 5 seconds: during this
time use the (UP/DOWN) keys to adjust intensity
between 2 and 100% in 2% increments (a gauge
illustrates the setting and the value is displayed).
Keep a key depressed to scroll quickly through the
allowed values.
Once the desired value is displayed, cease pressing
the keys. The display returns to its default setting
and the value is saved.
1 press
4 successive presses
"Light Off" display: underwater lights off
Down
Up
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
Nota bene :
Press the UP or DOWN keys while in High, Medium or Low mode to switch to the adjustable intensity mode.
4.1.1.6
"Underwater light effect" key
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
This key allows you to choose one of the seven available light effects and to adjust the speed of the
luminous cycle selected.
From the default screen, press this key and keep it down for 5 seconds. The current underwater light effect
setting is displayed.
While this setting is displayed, press the UP or DOWN keys to scroll though the available light effects.
33/48
2020/10 - Indice de révision : D - Code : 38050
SPAS
