BWT PERMAQ PRO 2000, Installation And Operating Manual

Page: 30 / 36

UK
30
Option 7 - Conductivity Meter including a 4-20 mA output 13.8.7
Part No.: 451202013
and 452536010
BWT PERMAQ® Pro 2000 units may be equipped with
a conductivity meter for metering and signal output.
The conductivity meter activates two solenoid valves, if
the water quality is >20 µS/cm so that the ”bad” water
is led to drain (quality flush).
Option 8 - Storage Tank 13.8.8
Part No.: **
200-2,000 litre AQUA FLEX reservoir with integrated
transport pump and pressure switch used for control-
ling start and stop of the BWT PERMAQ
®
Pro 2000.
Option 9 - Mixed-bed 13.8.9
Part No.: **
If a water quality < 0,5 µS/cm is required, we recom-
mend a BWT HOH Demi Mix (a mixed-bed unit) for
post-treatment of the reverse osmosis water.
Option 10 - Upgrade Kit 13.8.10
Part No.: **
If a larger permeate capacity is required, we recom-
mend installing an extra membrane which is included
in the upgrade kit for BWT PERMAQ
®
Pro 2000.
Option 11 - Tool/Spare Part Box 13.8.11
Part No.: 451409000
The tool/spare part box contains the most commonly
needed small parts and tools to be used when servicing
the BWT PERMAQ
®
Pro 2000, e.g. when replacing
membranes.