BWT PERMAQ PRO 2000, Installation And Operating Manual

Page: 29 / 36

UK
29
13.8 Options
For BWT PERMAQ
®
Pro 2010-2080 reverse osmosis unit you can select between following options, contact
**BWT Sales for further information.
Option 1 - Hose Connector Kit 13.8.1
Part No.: 656530195
BWT carry complete assembly kits (hose kits) for BWT
PERMAQ
®
Pro 2000 reverse osmosis unit.
Option 2 - Softening Units 13.8.2
Part No.: **
For optimal utilization of the water and to prolong the
membrane lifetime we recommend installing a BWT
softening unit with your BWT PERMAQ
®
Pro 2000.
Option 3 - Booster Pump Unit 13.8.3
Part No.: 454100560
A booster unit can be installed ahead of the softening
unit in case of lacking water pressure.
Option 4 - Carbon Filter/µ-Filter 13.8.4
Part No.: *******
In order to reduce the content of free chlorine, pesti-
cides, and organic solvents you may install a carbon
filter.
In order to prevent particles from clogging the mem-
branes, you can install a 5µ micron filter.
We recommend installing an extra manometer after
the pre-filter. A pressure drop of >1bar across the pre-
filter indicates that the filter cartridge should be re-
placed.
Option 5 - Mixing 13.8.5
Part No.: 451404197
If you need to increase the permeate conductivity over
20 µS/cm we recommend mixing for BWT PERMAQ
®
Pro 2000.
Option 6 - Conductivity Meter 13.8.6
Part No.: 451202013
BWT PERMAQ
®
Pro 2000 units may be equipped with
a conductivity meter for measuring the water quality.