BWT Disinfecton, Installation And Operating Manual

Page: 12 / 36

12
Technical Data
BWT Disinfecton
Neuthox Production Capacity
(±10%)
L/h* 9
Chloride Content in Neuthox ®
mg/L* 980
Free Active Chlorine ppm* 500
pH-value pH* 8.5
Approx. NaCl Consumption
Max.
Kg/day** 0.4
Pre-fuse A 13
Max. Power Consumption W 380
Voltage V 200 - 240 VAC (±10%); 50/60 Hz
Length of Power Supply Cable m 3
Enclosure Class, Electrical
Cabinet
IP54
Required Water Pressure at 15
L/min
Bar 1.5 – 6,2 bar
Max. Drain Back Pressure
Bar 0.2
Ambient Temperature Tolerance
Min
°C 5 < 40
Required Room Ventilation
m 3 /h 7
Recommended Running Hours
h/day 15
Maximum Running Hours
Water
h/day 20
Connection Hose Length
Water
m 1.3
Connection (BSP Male) Inlet
″
1/2
″
Connection (Push-in) Drain
mm 6
Drain Hose - min. inner
diameter
mm 4
Drain Hose - max. length m 5
Dosing Pump
No
Max. Flow Rate L/h -
Max. Pressure Bar -
Suction Head mWg -
Dimensions
Width mm 560
Height mm 1540
Depth mm 485
Weight Kg 63?
Brine Tank Capacity L 33
Neuthox tank Capacity L 33
Sound Pressure dB(A) 51
* Production is dependent on mechanical flow valve and is subject to variation (± 10%)
** Free available chlorine is dependent on each individual cell and is subject to variations (± 10%)
*** Salt consumption is calculated from empirical data and is subject to variations
**** Always supply power through a residual current circuit breaker