PROTECTION & SAFETY
7
2020/11 - Version: B - Code : 34561
INSTALLATION INSTRUCTIONS
1.
Important safety notice
‐
This cover is no substitute for common sense or individual responsibility. Nor is it intended to
substitute the vigilance of parents and/or responsible adults which remains the key factor in
ensuring the safety of young children;
‐
Caution: safety is only assured when the cover is closed, locked and correctly installed in
accordance with the manufacturer’s instructions;
‐
In the event of any absence, how-ever brief, from the home, the cover must be installed
systematically;
‐
Check that there is no person or foreign body in the pool both prior to and during opening and
closing of the cover;
‐
Keep the key used to activate the cover mechanism out of reach of children;
‐
The cover should only be opened/ closed by a responsible adult ;
‐
Standing, walking and jumping on the safety cover should be prohibited;
‐
In general, implement all steps necessary to deny young children access to the pool while the
cover is pending repair or during any malfunction preventing the pool from being closed and
secured or in the event that the pool or equipment is temporarily unavailable.
‐
A pool can represent a serious danger to your children. A person can drown very quickly. Children
near a pool require your constant vigilance and active supervision, even if they know how to swim.
‐
The physical presence of a responsible adult is absolutely mandatory while the pool is open.
Learn first aid techniques
Memorise emergency numbers and display these close to the
pool:
‐
Fire brigade:
‐
Medical emergency services:
‐
Poison treatment centre:
2.
Installation recommendations
The Coverdeck AX-IN automatic cover is designed for pool slat aprons at most 6.09 m wide.
According to the standard NF C15-100, a 30 mA RCD must be installed at the head of the electrical line powering
the Coverdeck AX-IN automatic cover.
The motorisation system is delivered with an electrical panel, it may only be operated with this electrical panel.
Any other use of the motor without the electrical panel, or vice versa, is dangerous and not advised.
The Coverdeck AX-IN cover may only be operated using a mechanism described in the NF P90-308, such as
the key switch supplied.
The automatic nature of the Coverdeck AX-IN cover in no way dispenses with the need for vigilance when the
cover is in motion. On encountering the slightest issue rolling the cover up or our, stop the movement and contact
a professional.