49
49
EN
8.3
Modifying the regeneration time
Use the Change mode button to switch to
programming mode.
SEt
The display shows
SEt
Confirm programming mode.
5 07:43
Switch to the regeneration time setting.
r 09:15
The regeneration time that is currently set is
highlighted by the “r” before it.
Confirm the setting for the regeneration time.
r 09:15
The view of the current setting flashes on the
display.
Move the cursor to the digits to be changed.
Set the new regeneration time.
r 02:00
Confirm the new regeneration time.
r 02:00
Close programming mode.
8.4
Starting manual regeneration
Hold down the OK button for approx. 4 sec. until
regeneration begins.
26:45
The screen alternately shows the remaining
regeneration time in minutes (with flashing
symbol) and
rEG On
.
rEG On
Summary of Contents for 6-501303
Page 28: ...28 DE H B A T...
Page 56: ...56 EN H W A D...
