BWT 109988, Installation And Operating Manual

Page: 70 / 96

EN
70
Quality of the pipeline network:
NOTICE: Corrosion-resistant materials must be used
for the piping in the purified water area (e.g. plastic
or stainless steel).
˳̴r³̴ò³©ãÜܳݯ̴ÆÝöþœÖÖÆݾ̴œ̴öÃĂþ̞ã½½̴ďœÖď³̴ãÝ̴þó̴ÆÝÖ³þ̴öƯ³̴
of MINISTIL rental equipment to interrupt the raw water
supply for service purposes.
Unauthorized modification and use of spare parts:
Modifications and changes to the device are only permitted
following consultation with the manufacturer. Original spare
parts and the accessories provided by the manufacturer
ensure safety. The use of other parts can exclude liability
for the resulting consequences.
Safety measures against microbial germs:
When using MINISTIL complete desalination cartridges,
microbiological problems (contamination) can occur.
To protect the MINISTIL system against contamination, we
recommend:
˳̴VœïƯ̴Ăö³̴ã½̴þó̴©œòþòƯ¾³ö̴œ½þ³ò̴ò³¾³Ý³òœþÆãÝ˿̴œÆÜ̴½ãò̴œ̴
maximum service life of 7 days for the cartridge
˳̴ãÝþÆÝĂãĂö̴¨œ©þ³òƜÖ̴©ãĂÝþ̴©Ã³©Ô
˳̴+ÝöþœÖ֜þÆãÝ̴ÆÝ̴òããÜö̴̴͝ɷɵ̴έ
˳̴"ÖĂöÃ̴¨³½ãò³̴Ăö³̴̒ò³öÆÝ̴¨³¯̴ďãÖĂ̴ܳã½̴ɶ̴̴̝ɷ̓
Prior disinfection with H
2
O
2
other disinfectants is not
permitted.
3.6 Impermissible operating method
The operational safety of the supplied device is only
guaranteed when the device is used in accordance with
Part 3.2 . The limiting values specified in the technical data
must not be exceeded.
These improper use of operation are to be excluded:
˳̴"³³¯̴Мþ³ò̴ãĂþöƯ³̴ã½̴þó̴þ³©ÃÝÆ©œÖ̴öﳩÆŇ©œþÆãÝö
(see pictograms, Part 3.3 );
˳̴ Gï³òœþÆãÝ̴ ݳœò̴ ¯Æò³©þ̴ óœþ̴ öãĂò©³ö̴ ãò̴ ãï³Ý̴ ňœÜ³ö̴ ̒³˺¾˺̴
radiators, exposure to sunlight);
3.5 Installation conditions
National guidelines and regulations:
Please observe the local installation and accident preventi-
on regulations, general standards and guidelines as well as
technical specifications. The connection to the water supply
network must be carried out by a licensed plumber.
Installation site and requirements:
For the installation of the device, choose a location that al-
lows it to be easily connected to the water supply.
The activated power supply and the required feed water
pressure must be guaranteed at all times.
Frost protection and ambient temperature:
The installation site must be dry and free of frost and ensure
the protection of the unit against chemicals, paint, solvents
and fumes.
Consequences of non-compliance:
Failure to observe the safety instructions can lead to the
loss of any claims for damages.
CAUTION: Non-observance of instructions can, for
example, result in the following hazards:
˳̴³ďÆ©³̴Ýãþ̴½ĂÝ©þÆãÝÆݾ
˳̴"œÆÖĂò³̴ã½̴ïò³ö©òƨ³¯̴ܜÆÝþ³ÝœÝ©³̴œÝ¯̴þòãĂ¨Ö³öÃããþÆݾ̴
methods
˳̴œÝ¾³ò̴þã̴öþœ½½̴½òãÜ̴³Ö³©þòÆ©œÖ̴œÝ¯̴ܳ©ÃœÝÆ©œÖ̴öœ½³þĖ̴
hazards
Requirements for the feed water:
The MINISTIL device must be operated with water quality
in accordance with the pictograms.
Setting the permissible operating pressure:
The permissible inlet pressure of the feed water inlet must
be between
2.5 ... 6.0 bar .
When the inlet pressure is >6.0 bar , a pressure reducer must
be installed. The installation of a pressure-reducing valve
can decrease the flow rate negatively.
4
6
8
10
1
2