DiREX-Pro User Manual (v. 0.1950)
© 2005 bwa technology gmbh
26
ease proceed as
llows:
ect a supported USB-WiFi controller (e.g.
D-Link DWL-122, available in computer stores)
2.
3.
k
properties” from the
tandard gateway.
4.
ed and enter the
Thi
e DVR’s SSID can be changed later. For
detailed description, please refer to section
3.3.8 of this manual.
onto an existing local network via the nearest
vehicle or train. Either static or dynamic IP addresses
. Optional Accessories / Supported Equipment
For first time connection, pl
fo
1. Conn
to your DiREX-Pro.xx (marked as “ext. devices”)
and reboot the DVR. Ensure that the “
READY
”
LED on the Recorder
flashes
, the DWL-122
LED “PWR” is on and that “LINK” also flashes.
A Peep-to-Peep (computer-to-computer)
connection “aaa” must be established and a
network configured.
Assign an IP address under “wireless networ
connection > TCP/IP
192.168.36.x
range, 255.255.255.0 as the
subnet mask and 192.168.36.250 as the s
Check that a connection has been establish
following address in the IE:
http://192.168.36.250
s IP address as well th
a
6.2 Infrastructure
Mode
This mode can be useful for automatic login
Access Point – e.g. from a driving
can be used. For a detailed description of WiFi configuration, please refer to section
of this manual.
7
Optional accessories are available for the DiREX-Pro DVR, some
additional software packages. For further information, please contact th
of which require
e manufacturer.
s
uts
(one pair for each
video channel) for additional con-
t
n-
con-
•
co
7.1 External Alarm Box (ALARM81-RS)
This accessory use RS232#2 interface (see section
1.6 and
3.3.4) and provides:
•
8 alarm inp
trol of video recording or genera-
tion of an “alarm” event. Each inpu
can be preset for operation as
“normally open” or “normally
closed”. The corresponding cha
nel will be connected to, or dis
nected from ground terminal;
1 alarm output
(one pair relays
equipment.
ntact) for control of any external
