BVItech BV-46, Instruction Manual

Page: 17 / 20

ENG 17
BV-46
6. When the alarm is sounding, press the ALM 1.2 to stop the alarm sound and automatically reset it to
come on the following day;
7. When alarm is sounding, touch the SNOOZE…LIGHT on the top of your unit once, the alarm will be
silenced and come on again according to the set snooze duration;
8. If the SNOOZE….LIGHT is not touched during the alarm is sounding, the alarm will last for 3 minutes
and then turns off automatically. The alarm will stop temporarily according to the set snooze duration
(5-60 minutes) and then sound again. This automatic snooze function will last for 1 hour;
9. To stop the alarm sound, press the ALM 1.2 to stop the alarm sound and automatically reset it to come
on the following day.
5. To use the White LED Light or the Color changing Mood Light
1. Simply tap on the top SNOOZE…LIGHT of your unit to turn on the white LED light. The LCD display
shows L10 , which is the default brightness of the white LED light. You could press
▲
or
▼
to
increase or reduce the brightness Level from 0 (lowest) to L15 (highest);
2. Touch the top SNOOZE…LIGHT again to turn on the color changing mood light. The LCD shows ;
3. Touch the top SNOOZE…LIGHT again to fix a color of your mood light. The LCD shows ;
4. Touch the top SNOOZE…LIGHT again to turn off all the light function.
Note: The LCD display will return to time display in 8 seconds if there is no further press of any button.
6. To use the HI-LO Dimmer Control
Simply press
once to select Hi-Lo brightness of the LCD display.
7. To use the Mode Function
Simply press MODE to change the mode as bellows:
Clock Mode → Radio Mode → Nature Sounds Mode → AUX Function Mode → Return to Clock Mode
8. To listen to the Radio
1. Press
MODE
once to turn on the radio, the clock display will show the radio frequency in ;
2. Then press to tune into a desired radio station. To scan the stations, touch and hold
▲
or
▼
for a
few seconds and release. The radio will search and stop on the next strong station.
Remark:
keep your radio away from fluorescent lamps or mobile phone, which may cause interference
to the radio.
9. To listen to Nature Sounds
1. Press MODE one at a time, the LCD shows , , or with the
icon to indicate
your selected nature sound:
: birds
: forest
beach / water front
: rain and storm
10. To use the AUX Function to play Music in your iphone, ipod or MP-3
1. Press MODE one at a time until the LCD shows under the time digits.
2. Plug in the AUX cable to the AUX Line-in socket at the back of your Wake-Up-Light Radio and one
end to the earphone socket of your iPhone, iPod or MP3 device.
3. Turn on your MP3, iPhone or iPod to play the music you like. Adjust the volume by using the
and
▲
or
▼
if you need.
Note: You could stop playing the radio, the nature sound or your MP3 music anytime by pressing and
holding MODE for 2 seconds.