9
TM
Installation Instructions
TGS06
Salt Spreader
—continued inside
WARNING
Observe the following Safety Precautions before, dur-
ing and after operating this spreader. By following
these precautions and common sense, possible injury to
persons and potential damage to this machine may be
avoided.
Safety Precautions
1.
Read this entire Installation Instruction before
operating this spreader.
2.
Read all safety decals on the spreader before
operating.
3.
Verify that all personnel are clear of the spread-
er spray area before starting or operating this
spreader.
4.
Do not adjust, clean, lubricate or unclog material
jams without first turning off the spreader.
5.
Make sure the spreader is securely fastened to
the vehicle in accordance with this manual.
6.
Do not operate a spreader that is in need of
maintenance or repairs.
7.
Always disconnect the battery before removing
or replacing electrical components.
Spreader Assembly
Check contents of box against parts list to make
sure all components are included. When ordering
replacement or spare parts refer to parts list
(figures 8 and 9)
for part numbers.
