www.buyersproducts.com
Phone (440) 974-8888
Fax 800-841-8003
Installation Instructions
LT46
Hand Tool Rack
for use with LT45 Storage Basket
Before You Begin Installing:
1.
Read and understand these instructions completely.
2.
Verify that you have received all the parts listed in the bill of
materials for your model number.
CAUTION
Always wear safety glasses when using power tools.
—continued
1
Fig. 1
Fig. 2
WARNING
Do not overtighten the nylock nuts for the top and bottom
angles, as overtightening can lead to deformation.
Tools Required:
•
(2) 9/16" Wrenches and/or Sockets
•
(2) 1/2" Wrenches and/or Sockets
•
Electric Drill
1.
Using four 3/8" – 16 x 2.25" carriage bolts (4A), the four 3/8"
washers (4B), and four nylock nuts (4C), mount the posts (1) onto
the front or back panel of the LT45 basket. The posts should be
spaced 35" apart from hole-to-hole. (Figure 2)
2.
Using four 3/8" – 16 x 2.25" carriage bolts and four nylock nuts,
attach the top tool holder (3) to the top of the posts. (Figure 1)
3.
Mount the bottom tool holder (2) to the posts using the four
remaining 3/8" – 16 x 2.25" carriage bolts and four nylock nuts.
(Figure 1)
4
. Insert the five grommets (4D) into the holes on the top tool
holder (3).
