22
INSTALLATION
This gas stove must be installed on a flat and stable surface.
Unscrew the power button cover (8), put one AAA battery into the power compartment with the an-
ode(+) facing out, then screw the button cover back on.
Instructions to connect the gas circuit to the LPG bottle:
Have a suitable screwdriver at hand. Before mounting, make sure that all protective packaging material
has been removed. The regulator is not supplied with this appliance and must be used in accordance
with current national regulations. Consult the specifications for the gas regulator and adequate con-
sumption (g/h). The LPG bottle must be standard. The replacement must be as specified in the “Gas
Requirements” section of this Instruction Manual. Be careful: do not bend the flexible rubber tube of the
gas circuit.
●
Make sure the gas knob on the appliance is turned “OFF” before assembling (see Figure below).
●
Connect the stove hose to the pressure regulator. Tighten the screw on the hose clamp with a screw-
driver.
●
Place the LPG bottle and hose inside the appliance in a safe vertical position.
MANUAL NEW ATALAYA.indd 22
MANUAL NEW ATALAYA.indd 22
12/7/22 12:02
12/7/22 12:02
