Butler NAV51.15 Instruction Manual Download Page 18

Page: 18 / 131

INSTRUCTION, USE AND

MAINTENANCE MANUAL

Page 18 of 96

7522-M004-1_B

NAV51.15 - NAV51T.15 - NAV51.15N

11.4 Control device (valid for NAV51.15 and

NAV51T.15 models with bluetooth ver-

sion)

The control (handle control) (see

Fig. 13

) can be

moved according to the positioning necessities of the
operator.
The operator should place the control in a zone free
from obstacles in order to see clearly and completely
the operative zone.

MAKE SURE THERE ARE NO PER-

SONS OR OBJECTS HIDDEN TO

THE OPERATOR VISUAL FIELD

BY THE WHEEL SIDE PLAY (ESPE-

CIALLY IN CASE OF WHEELS WITH

LARGE DIMENSIONS).

The flashing green led “

”, indicates the machine

stand-by position. When any control is operated, the
machine is started and it is ready for operation. During
functioning, the led “

” is turned on with a fixed light.

The red turned on led “

” and the green turned off

led “

” indicate that the manipulator batteries are

exhausted: in order to carry on the functioning, the
batteries must be charged.

IN ORDER TO ACTIVATE THE COM-

MUNICATION BETWEEN HANDLE

CONTROL AND MACHINE, ON MA-

CHINE SWITCHING AND AFTER

EACH POSITIONING IN STAND-BY

MODE, IT'S NECESSARY TO OPER-

ATE ANY JOYSTICK (LEVER “H”

OR LEVER “I”) FOR 5 SECONDS

AT LEAST.

“Push button

” has a maintained control position, and

when pressed it rotates the tool holder head counter-

clockwise (from behind the tool).
“Push button

” has a maintained control position, and

when pressed it rotates the tool holder head clockwise
(from behind the tool).
“Push-button

” has a maintained control position,

and when pressed, it operates the self-centring chuck
opening.
“Push-button

” has a maintained control position,

and when pressed it operates the self-centring chuck
closing.
“Button

” has one “hands-on” operating position:

when it is pressed and lever “

” or “

” is laterally

shifted at the same time, it doubles the translation
speed of the self-centring carriage and of the tool holder
carriage respectively.
“Lever

” has four maintained control positions:

- Lever rightwards or leftwards, operates respectively

the tool holder carriage shifting rightwards or left-
wards.

- Lever upwards or downwards: it respectively lowers

or lifts the tool holder arm.

“Lever

” has four maintained control positions:

- Lever rightwards or leftwards, operates respectively

the mandrel holder carriage shifting rightwards or
leftwards.

- Lever upwards or downwards: it operates respectively

the rising and the lowering of the mandrel holding
arm.

“Pedal

” starts clockwise and anti-clockwise rotation

of the mandrel.
When any control is operated, the machine is started

again, ready for operation: led “

” flashes.

THE HANDLE MUST NOT BE

PLACED WHERE WATER STAG-

NATES.

Fig. 13

Summary of Contents for NAV51.15




































































































































Search results

Summary of Contents for NAV51.15

Reviews:

Butler NAV51.15, Instruction Manual, Page: 18 / 131

Search results

Summary of Contents for NAV51.15

Reviews: