BUSKRO BK7IB-2, User Manual

Page: 94 / 97

Appendix E AC Motor Drive Settings Page C-10
Buskro Ltd. BK7IB-2
C.3.7 Group 6: Protection Parameters
Table C-7:
Parameters Functions Settings
Buskro
Setting
6-00
Over-Voltage
Prevention Level 0: disable
350 ~ 410V
390
6-01
Over-current
Prevention Level 0: disable
20 ~ 200%
170
6-02
Over-torque
detection
0: disable
1: enable during constant speed operation and
continues until the continuous limit is reached.
2: enabled during constant speed operation and
halted after detection.
3: enabled during accel and continues before
continuous output time limit is reached.
4: enabled during accel and halted after over-torque
detection.
0
6-03
Over-torque
detection level
30 ~ 200% 150
6-04
Over-torque
detection time
0.1 ~ 10.0 Sec 0.1
6-05
Electronic thermal
overload relay
0: Not used
1: Act with standard motor
2: Act with special motor
0
6-06
Electronic thermal
characteristic
30 ~ 600 Sec 60
6-07 Present fault record 0: No fault occurred
6-08
Second most recent
fault record 1: oc (over current)
2: ov (over voltage)
6-09
Third most recent
fault record 3: oH (over heat)
4: oL (over load)
6-10
Forth most recent
fault record 5: oL 1 (electronic thermal)
6: EF (external fault)
6-11
Fifth most recent
fault record 7: Reserved
8: Reserved
6-12
Sixth most recent
fault record
9: ocA (current exceed during acceleration)
10: ocd (current exceed during deceleration)
11: ocn (current exceed during steady state)
0