BUSKRO BK7IB-2, User Manual

Page: 93 / 97

Appendix E AC Motor Drive Settings Page C-9
Buskro Ltd. BK7IB-2
4-06
Multi-function input
terminal 3 (M3)
(d 0, d 4 ~ d 20)
4: External fault, normally open (N.O.)
5: External fault, normally closed (N.C.)
6: RESET
7: multi-step speed command 1
8: multi-step speed command 2
9: jog operation
10: accel/decel speed inhibit
11: first or second accel/decel time
selection
12: base-block (B.B.), normally open (N.O.)
13: base-block (B.B.), normally closed (N.C)
14: increase master freq.
15: decrease master freq.
16: run PLC program
17: pause PLC
18: counter trigger signal
19: counter reset
20: select ACI/deselect AVI
7
C.3.6 Group 5: Multi-step Speed and PLC Parameters
Table C-6:
Parameters Functions Settings
Buskro
Setting
5-00 1
st
step speed freq,
0.0 ~ 400Hz
0.0
5-01
2
nd
step speed
0.0 ~ 400Hz 0.0
5-02 3
rd
step speed freq. 0.0 ~ 400Hz 0.0
5-03 PLC mode
0: Disable PLC operation
1: Execute one program cycle
2: Continuously execute program cycles
3: Execute one program cycle step by step
(separate by STOP)
4: Continuously execute one program cycle
step by step (separate by STOP)
0
5-04
PLC
forward/reverse
motion
0 ~ 15 (0: Forward, 1: Reverse) 0
5-05
Time duration step
0 ~ 65500 Sec 0
5-06
Time duration step
1
0 ~ 65500 Sec 0
5-07
Time duration step
0 ~ 65500 Sec 0
5-08
Time duration step
3
0 ~ 65500 Sec 0