Enable bluetooth on your device and select your
DAB Digital Radio from the devices list. It will
read: Heritage P1.
Select the song you want and press play.
Press the MODE button until “Bluetooth Mode”
appears on the screen.
7. BLUETOOTH / NFC
You can play music from any Bluetooth-enabled device
through your Heritage P1.
8. UNDOK SMART APP CONTROL
You can control the product using your smartphone with the
UNDOK App installed. Multiroom and Control Volume,
Download UNDOK App from App Store for your
iOS smartphone or download from Google Play
Connect your radio to the same WI-FI network
as your smartphone. Start UNDOK App.
All available devices will be listed. Tap your radio
Mode & Stations using UNDOK for the products in the
for your Android smartphone.
mode, play music, etc.
your radio by using your smartphone to switch
“Heritage P1” to connect to, then you can control
Press MODE button repeatedly to select “DAB” Mode.
For initial use, radio will carry out a full scan and
store available DAB stations in memory. Make sure
Turn and then press SCROLL/SELECT knob to listen
5. LISTENING DAB RADIO
Mode “DAB” lets you listen to all digital radio stations in clear
crystal sound, with better reception and more choice.
to your desired DAB stations.
www.digitalradioplus.com.au
To check if you have coverage in your area, visit:
antenna is fully extended.
4. PLAY MUSIC VIA SPOTIFY CONNECT
Your radio has Spotify Connect built-in, this lets you control
the music on your radio using the Spotify App on your
The Heritage P1 radio must be connected to the same
network as your smartphone or tablet. Open the Spotify
Tap the song cover image at the bottom left
corner of the screen, and then tap the Spotify
Tap “Heritage P1” from the list.
smartphone, tablet or PC.
App on your smartphone or tablet and play any song.
Connect icon .
1. GETTING STARTED:
d
Switch the main power switch to “POWER ON”.
Press to turn the radio on. “Setup wizard” will be shown when
switched on for the first time.
2. SETUP WIZARD
When your Heritage P1 is started for the first time, it runs
through a setup wizard to configure settings for
Press SCROLL/SELECT knob to start setting.
date/time and network.
Turn and then press SCROLL/SELECT knob to set
12 or 24 hour format, synchronously update clock
connection in all modes and select your network
from DAB, FM, Network or No update. Keep network
and insert the network password to connect.
select your desired mode.
Setup wizard is completed, press SCROLL/SELECT
“Internet radio” being highlighted. Now, you can
knob to exit. “Main menu” will be shown with
3. LISTENING INTERNET RADIO
Mode “Internet Radio” lets you listen to thousands of global
Internet radio stations and Podcasts.
Press SCROLL/SELECT knob to select “Internet
radio” in main menu.
Turn and then press SCROLL/SELECT knob to select
your desired Internet radio station or Podcast.
BLUETOOTH:
Press the MODE button until “Bluetooth” appears
on the screen.
Make sure your smartphone is set to visible and
turn on NFC.
Hold close or TAP your smartphone to the
NFC:
(NFC logo) mark located on right side of your product.
located on right side panel of the product.
Note: If pairing is not successful you may need to
rotate your smartphone while on the mark
When establishing a connection via WPS, you can select
“Push Button” to press SCROLL/SELECT knob on
eatablish connection; or select “PIN” to enter the
your radio and SELECT button on your router to
8-digit number which is created by your radio into
network password and then enter your password
can select “Skip WPS” if you are using a standard
your router to eastablish connection; also you
to complete the connection.
of the User Guide for this product, visit
http://www.bushaustralia.com.au/heritage-ii-connect
For more information and a full version
b
Connect the power cord into the DC-In socket.
Connect the plug to the mains socket.
a
c
w?
Setup wizard
Start no
NO
YES
Connect
Spotify
Bluetooth
Mode
Internet
Mode
Scan
Stations: 12
Scanning
during setup. In this case to disable the “keep network
NOTE: When used outside of network range, this
when the “keep network connection” setting is selected
product will always scan for a network connection
connection” go to MENU>MAIN MENU>SYSTEM SETTINGS
6. USING PRODUCT ON BATTERY
Allow 6hrs for the battery to be fully charged.
To use on battery disconnect power cable from the
back of the Heritage P1. Press power switch to
Product can run on battery for 8-10hrs at 2/3 volume.
NOTE: When in standby this product will use battery
“Power ON and then press the button”.
power as the screen and network settings are active.
To save the battery when not in use switch the main
power switch on the back to “Power OFF”.
NOTE: Keep connected to mains power for 6hrs to allow battery to
be fully charged.
UONPJMN=ebofq^db=mN|npd=ENRMVMUF=`çîÉê=^êíJçJÉãÄJmobppKéÇÑ===N===ULMVLOMNR===OWMU=éã
>NETWORK>”Keep Network connected” and set to NO.
kitchen, bedroom or living room.
