background image

Installing your cooker

Bringing it all together

Installing your cooker

18

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the 

Troubleshooting

 section of these instructions, 

Points that must be checked during flexible hose 
assembly:

• 

If the gas connection is made by a flexible hose 
fixed onto the gas inlet of the hob, it must be fixed 
on by a pipe collar. 

• 

Connect your appliance with a short and durable 
hose that is as close as possible to the gas source. 

• 

The permitted maximum length of the hose is 1.5 
m. 

• 

The hose that supplies the appliance with gas must 
be changed once a year for your safety.

• 

The hose must be kept clear of areas that may heat 
up to temperatures of more than 90°C.

• 

The hose must not be cracked, torn, bent or folded.

• 

Keep the hose clear of sharp corners and objects 
that could move.

• 

Before you assemble the connection, you must 
make sure the hose is not damaged. Use bubbly 
water or leakage fluids to perform the check. Do 
not use a naked flame to check for gas leakage.

• 

All metal items that are used during gas connection 
must be free from rust. Check the expiry date of any 
components used for connection.

• 

Points that must be checked during fixed gas 
connection assembly

The method used to assemble a fixed gas connection 
(gas connection made by threads, e.g. a nut) varies 
according to the country you are in. The most 
common parts for your country will be supplied 
with your appliance. Any other parts required can be 
supplied as spare parts.

During connection, always keep the nut on the gas 
manifold fixed while rotating the counter-part. Use 
appropriately-sized spanners for a safe connection. For 
surfaces between different components always use the 
seals provided in the gas conversion kit.

The seals used during connection should also be 
approved to be used in gas connections. Do not use 
plumbing seals for gas connections.

Remember that this appliance is ready to be connected 
to the gas supply in the country for which it has been 

produced. The main country of destination is marked 
on the rear cover of the appliance. If you need to use it 
in another country, any of the connections in the figure 
below may be required. In such a case, contact local 
authorities to learn the correct gas connection.

Gas pipe

Gas pipe

Seal

Seal

Hose 
fitting

Adapter

Gas hose 

with collar

Mechanical
gas hose

Gas pipe

Gas 
pipe

Seal

Mechanical gas 
hose

Mechanical 
gas hose

The Cooker must be installed and maintained by 
a suitably qualified gas registered technician in 
accordance with current safety legislation.

WARNING: 

Do not use a naked flame to check for 

Summary of Contents for DHBDFBL60B













































Reviews: