Dealer: inform the Purchaser of this product of the Warranty terms, provisions, and procedures that are
applicable. Submit warranty information to Bush Hog
Dealer should inform Purchaser to review the contents of this Operator’s Manual including safety equipment, safe
operation, and maintenance, to review the Safety Signs on the blower (and tractor if possible), and of Purchaser’s
responsibility to train his/her operators in safe operating procedures.
• MACHINE: explain that Deflectors, Chain Guards, or Safety Devices must be installed and maintained in good
repair.
• DRIVE-LINES: make certain that all drive-line, gearbox, and other shields are in good repair and fastened
securely in place to prevent injuries from entanglement or thrown objects.
• HYDRAULIC COMPONENTS: explain the necessity of using clean hydraulic oil, changing filters as instructed,
stopping leaks, damage caused by operating with over-heated oil, caring for hoses, using hoses of proper rating,
maintaining the specified operating pressure and the potential hazard of oils penetrating the skin.
• LIFTING: explain that there is an increased possibility of thrown objects when the blower is lifted off the ground
while in operation and that operator is responsible to watch out for persons in the area. Explain that the lifted
blower can contact overhead obstructions with damage to cables and telephone lines and result in possible
injury and that the chute can contact power lines resulting with electrocution, injury or death and that operator is
responsible for keeping clear of such hazards.
DEALER to CUSTOMER Pre-Delivery/ Operation Instructions
Dealer: please inspect the machine before delivery to the customer:
• Check fan and auger clearance and they turn freely
•
Discharge and deflector move freely
• All fasteners are tight
• Grease zerks and pivot points lubricated
• Check that lock pins align and move freely
• Operating and safety instructions reviewed
• All safety decals installed
• Guards and shields installed and secured
• SMV sign installed (if required)
• Retainer installed through hitch points
5
Summary of Contents for SBLM66
Page 35: ...Notes 35...
