Bush Hog HT625H, Operator'S Manual

Page: 34 / 76

ASSEMBLY
HT625H 03/19 Assembly Section 3-4
© 2019 Alamo Group Inc.
ASSEMBL
Y
ASSEMBLY SEQUENCE
General Assembly
Place the rotor axle (1) in a stable position and then mount the tire supports (6) and (7) using pivot (8) and
circlips (16) to mount to the rotor axle, so they are facing in the direction shown in
Figure Asm-HT-0032. Use
the washer (9) and nut (10) to assemble the wheels with their guards (4) and (5) on to the tandems. Make sure
that when the wheel brackets (12) are mounted on to the supports (11), the bracket plate matches the plate
divided into sections for the various supports. Use screw (13), nut (14) and washer (15) to fasten the wheel
bracket into position.
Asm-HT-0032
The wheels should face in the direction shown in the drawing. Asm-HT-0033