Bush Hog HT419H, Operator'S Manual

Page: 66 / 84

OPERATION
HT419H 05/22 Operation Section 4-18
© 2022 Alamo Group Inc.
OPERA
TION
10.2 Adjustment for Correct Working Position
These machines are very easily adjusted. For best operation, the tines 1 on the front side of the machine
should brush the ground. To obtain this, turn the adjustment crank 2.
10.1 Operating the Hay Tedder In Field (Hydraulic Fold)
To lower the side arms 1 & 2 of the PT419H hydraulic fold, move the distributor lever 3 so as to send fluid
through hose 4 & 5 to cylinders 6 & 7, which will close completely, pulling rope 8 at the same time as when
moving distributor lever 3, thus making it possible to release catch 9 from pin 10 (RH and LH side). Then
moving the distributor lever 3 so as to lower side arms 1 & 2 down to the ground. (Cylinders 1 & 2 are single
acting, so the side arms 1&2 lower by their own weight, and therefore this operation must be carried out in a
suitable area.)
OPS-HT-0046_F