BUSCH SIMPLEX VO 0040 B, Operating Instructions Manual

Page: 49 / 52

17 | EU Declaration of conformity
0870S03254
_VO 0040-0080_B_-0000_IM_en
49 / 52
17 EU Declaration of conformity
This EU declaration of conformity and the CE marking on the name plate apply to the machine in the scope of the delivery
by Busch. The manufacturer is solely responsible for issuing this declaration of conformity.
If the machine is integrated into a higher-level machine system, the manufacturer of this system (if applicable, the com-
pany operating the system) must issue a declaration of conformity for the higher-level machine or system and affix the CE
marking.
Manufacturer Dr. Ing. K Busch GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Declaration for vacuum system(s) of type: VO 0040 B, VO 0060 B, VO 0080 B
with serial number from 2021 … to 2022 …
was/were produced according to the following EU standards:
−
"Machinery directive" 2006/42/EG
−
"Directive on electromagnetic compatibility" 2014/30/EU
−
“RoHS2 Directive” 2011/65/EU, 2017/2102, Restriction of the use of certain hazardous substances in electrical and
electronic devices
and according to the corresponding standards.
Standard Name of the standard
EN ISO 12100:2010 Safety of machinery – General principles for design, risk assessment and
risk reduction
EN ISO 13857:2019 Safety of machinery – Safety distances to prevent hazard zones being
reached by upper and lower limbs
EN 1012-1:2010
EN 1012-2:1996+A1:2009 Compressors and vacuum pumps – Safety requirements – Parts 1 and 2
EN ISO 2151:2008 Acoustics – Noise test code for compressors and vacuum pumps –
Engineering method (grade 2)
EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
EN IEC 61000-6-2:2019 Electromagnetic compatibility (EMC) – Generic standards – Immunity
standard for industrial environments
EN 61000-6-4:2007+A1:2011 Electromagnetic compatibility (EMC) – Generic standards – Emission stand-
ard for industrial environments
EN ISO 13849-1:2015 Safety of machinery – Safety-related parts of control systems – Part 1:
General principles for design
Person authorized to compile the technical data: Klaus Digeser
Dr. Ing K. Busch GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Maulburg, 01/07/2021
Dr.-Ing Karl Busch, general manager