EU Declaration of Conformity | 16
Instruction Manual R5 RU 0050-0070 B_EN_en
31 | 36
16
EU Declaration of Conformity
This Declaration of Conformity and the CE-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Decla-
ration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating compa-
ny, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix
the CE-marking.
The manufacturer
Busch Produktions GmbH
Schauinslandstr. 1
DE-79689 Maulburg
declares that the machine: R5 RU 0050 B; R5 RU 0070 B
fulfill(s) all the relevant provisions from EU directives:
– ‘Machinery’ 2006/42/EC
– ‘Electromagnetic Compatibility’ (EMS) 2014/30/EU
– ‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment (incl. all related applicable amend-
ments)
and comply(-ies) with the following designated standards that have been used to fulfill those provisions:
Standards
Title of the Standard
EN ISO 12100 : 2010
Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019
Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-2 : 1996 + A1 : 2009
Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 55011 : 2016 + A1 : 2017
Class A (industry)
Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and
methods of measurement
CISPR 11 : 2015 / AMD2 : 2019
Class A (industry)
Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and
methods of measurement
CFR 47 FCC Part 15;
Class A (industry)
The FCC 47 CFR Part 15 from the Federal Communications Commission: rules and regulations for
EMC.
EN 60204-1 : 2018
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ICES-001
Industrial scientific and medical (ism) radio frequency generators
EN IEC 61000-6-2 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial environ-
ments
EN 61326-1 : 2013 Table 2
Electrical equipment for measurement, control and laboratory use. EMC requirements. General re-
quirements
EN 61000-3-2 : 2019
Class A (industry)
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equip-
ment input current
≤
16 A per phase)
EN 61000-3-3 : 2013 + A1 : 2019
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctua-
tions and flicker in public low-voltage supply systems, for equipment with rated current
≤
16 A per
phase and not subject to conditional connection.
EN 61010-1 : 2010 + A1 : 2019
+ A1 : 2019 / AC : 2019
Safety requirements for electrical equipment for measurement, control, and laboratory use. General
requirements
Legal person authorized to compile the technical file
and authorized representative in the EU
(if the manufacturer is not located in the EU):
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Maulburg, 18.08.2021
Dr. Martin Gutmann
General Manager
Busch Produktions GmbH
