BUSCH PANDA WZ 0250 B, Instruction Manual, Page: 14 / 36

6 | Electrical Connection
14 | 36 Instruction Manual PANDA WZ 0250-0500 B_EN_en
6 Electrical Connection
DANGER
Live wires.
Risk of electrical shock.
●
Electrical installation work must only be executed by qualified personnel.
CURRENT PROTECTION OF THE CUSTOMER INSTALLATION:
DANGER
Missing current protection.
Risk of electrical shock.
●
Current protection according to EN 60204-1 must be insured by the customer on its installation.
●
The electrical installation must comply with the applicable national and international standards.
NOTICE
Electromagnetic compatibility.
●
Make sure that the motor of the machine will not be affected by electric or electro- magnetic
disturbance from the mains, if necessary seek advice from Busch.
●
Make sure that the EMC of the machine is compliant with the requirements of your supply
network system, if necessary provide further interference suppression (EMC of the machine, see
EU Declaration of Conformity [
➔
32] or UK Declaration of Conformity [
➔
33]).
6.1 Machine delivered without Control Box or Variable
Speed Drive (VSD)
DANGER
Live wires.
Risk of electrical shock.
●
Electrical installation work must only be executed by qualified personnel.
NOTE
The operation with variable speed, i.e. with a variable speed drive or a soft starter unit, is
allowed as long as the motor is capable and the permitted motor speed range is respected
(see
Technical Data [
➔
30]).
Seek advice from your Busch representative.