6 | Installation
12 / 20
Installation and Retrofit Instructions DOLPHIN LM 0180-0270 A, LT 0170-0220
A_EN_en
6.3 Motor & Coupling Installation
• Refer to coupling manufacturer’s manual for details of coupling fitment to motor and
pump shafts.
• Install motor adaptor to motor pedestal then install motor onto motor adaptor.
6.4 Electrical Connection
DANGER
Risk of death due to electrical shock!
Death or serious injury!
• Be sure that the power supply provides the correct voltage and is designed for the re-
quired current.
• Use suitable circuit breakers with the prescribed nominal current between the mains
and drive controller.
• Use suitable fuses with appropriate current values between the mains and drive con-
troller (see technical data).
• The drive controller must be grounded with the motor according to relevant regula-
tions. Noncompliance may result in serious injury.
WARNING
DAMAGE TO PROPERTY POSSIBLE!
If the information is not observed, the drive controller could be damaged and destroyed
during subsequent commissioning.
Commissioning may only be performed by qualified staff.
Safety precautions and warnings must always be observed.
Summary of Contents for LM 0180 A
Page 19: ...Note ...
