background image

EU Declaration of Conformity | 14

Instruction Manual DOLPHIN LM 0100-0800 A, LT 0130-0750 A_EN_en

35 | 40

14

EU Declaration of Conformity

This Declaration of Conformity and the CE-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Decla-
ration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating compa-
ny, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix
the CE-marking.

The manufacturer

Busch GVT Ltd.
Westmere Drive, Crewe Business Park
Crewe, Cheshire, CW1 6ZD
United Kingdom

declares that the machine: DOLPHIN LM 0100 A; DOLPHIN LM 0180 A; DOLPHIN LM 0270 A; DOLPHIN LM 0530 A; DOLPHIN LM 0800 A; DOLPHIN LT
0130 A; DOLPHIN LT 0170 A; DOLPHIN LT 0220 A; DOLPHIN LT 0320 A; DOLPHIN LT 0430 A; DOLPHIN LT 0510 A; DOLPHIN LT 0630 A; DOLPHIN LT 0750
A
fulfill(s) all the relevant provisions from EU directives:
– ‘Machinery’ 2006/42/EC
– ‘Electromagnetic Compatibility’ (EMS) 2014/30/EU
– ‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment (incl. all related applicable amend-

ments)

and comply(-ies) with the following designated standards that have been used to fulfill those provisions:

Standards

Title of the Standard

EN ISO 12100 : 2010

Safety of machinery - Basic concepts, general principles of design

EN ISO 13857 : 2019

Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs

EN 1012-2 : 1996 + A1 : 2009

Vacuum pumps - Safety requirements - Part 2

EN ISO 2151 : 2008

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)

EN 60204-1 : 2018

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

EN IEC 61000-6-2 : 2019

Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments

EN IEC 61000-6-4 : 2019

Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial environ-
ments

ISO 21940-1 : 2019

Mechanical vibration – Rotor balancing

Legal person authorized to compile the technical file 
and authorized representative in the EU 
(if the manufacturer is not located in the EU):

Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg

Crewe, 16.04.2021

Tracey Sellars, General Director

Summary of Contents for LM 0100 A









































Reviews: