Advanced settings
7.7.2 Function keys
The function keys are used to activate/stop a function or to adjust set points.
Per initial settings, 8 function keys are allocated and distributed over 2 levels: they can
be reallocated by the operator.
Fig. 2
7
:Function keys
Allocating function keys
From the "Settings" screen, press
[Config.] [Function Keys]
.
Each function key can be allocated to a function chosen by the operator: see the exam-
ple below.
Example: Allocate the ’Correction’ function (1) to the
[Mode]
function key (2).
Fig.
28
:Allocation objective
Select the ’Correction’ function (1) using the
and
.
Fig.
29
:Selecting the function
Select the
[Mode]
function key (2) by pressing repeatedly (key selected if background
is white).
START
STAND-BY
Thanks to the function keys, it is possible to give the operator access to a limited
number of functions and to use a password to lock unauthorised functions on the
"Settings" menu. They are sufficient to manage the detector.
To allow the operator to use only the
[Start/Stand-by]
key, do not allocate a function
to the function keys and lock the "Settings" menu.
Up to 4 additional function keys can be added, for a maximum of 12. In this case, a
3
rd
level is made available to the operator.
1
2
1
61
0870231897_0001_IM_en
Summary of Contents for 0659230708
Page 79: ...Note 79 0870231897_0001_IM_en...
