Busch-Welcome
®
Operation
| 2CKA001473B7474
— 22 —
5.2.8.5
Camera list
Fig. 16: Camera list
Surveillance cameras can be integrated and set in the door communication system.
When changing to "System settings Camera list" the following functions become available:
No.
Function
1
Overview of available cameras
2
Adjust
– By tapping on this button you switch to the page for assigning a name to the selected camera.
3
Back
– By tapping on this button you return to the start page without saving the settings.
4
Delete
– By tapping on this button you delete the camera from the device. It will then be no longer displayed.
However, the camera remains active in the system.
– By tapping on the "Update list" button the camera will be displayed again in the list.
5
Floor call camera
This function is active only when a camera has been activated via module 3 in the camera interface.
– Then this camera acts as internal camera. This, for example, is the camera that has been additionally
installed at the apartment door. This can be switched to when this button is active.
6
Activate camera
With this function you select the camera whose image is displayed when surveillance is activated.
– By tapping on this button you activate or deactivate this function.
– When this function is deactivated, the image of the first camera in the list is always displayed.
– When this function is activated, the image of the camera selected in the list is always displayed.
By tapping on a camera in the list you activate or deactivate the camera. If several cameras in the list are
activated, the image of the first camera is displayed.
5
7
6
4
3
2
1
