background image

3

Position, volume
Install the components of the device in the vehicle so that your field of 
vision is not impaired and the components are not mounted in the im-
pact  zone  of  the  passenger  compartment  or  in  the  airbag  inflation 
zones. The removal of coverings (with and without airbags) or compo-
nents of the dashboard requires – in some cases – special tools and 
special knowledge.

Intended use
We shall not be liable for damages or malfunctions due to improper use 
of  the  device.  Therefore,  do  not  expose  the  device  to  moisture,  ex-
treme temperatures or shocks and carefully follow the procedure de-
scribed in the installation and operating guidelines.

Use while driving
Operate the system only when the situation allows it and when you do 
not endanger, harm, constrain, or annoy other road users. The volume 
of the device has to be set in a way that exterior noise is still audible.

Faults
Do not commission the device if you detect or assume a defect. In this 
case, contact a BURY specialised dealer or our hotline. Improper repair 
efforts can be dangerous for you. Therefore, only skilled personnel may 
perform inspections.

Summary of Contents for CL 1010













Reviews: