27
Settings
In this menu point, you can configure the HFCK through five further
submenus.
Bluetooth
In the
Phone list
, the telephones are listed which have already been
successfully connected with the HFCK via
Bluetooth
®
. The list is able to
hold a maximum of ten telephones. If an additional telephone is con-
nected then the oldest entry is deleted.
Here, every telephone can be connected, disconnected, deleted or set
as the standard. The standard telephone will always be sought as the
first telephone if the automatic connection
„AUTO CONNECT ON“
has been activated. From here, the
Bluetooth
®
connection can also be
made via A2DP and the playback of music initiated.
With the
„CLEAR LIST“
command it is possible to delete the full tele-
phone list. You are able to assign an individual
„PIN CODE“
for the
Bluetooth connection in the next menu item. Your own code must be at
least four figures long – with a maximum of eight being allowed.
Voice dial
In this submenu you can carry out the following settings:
Activating or deactivating the Advanced Help feature:
If you activate the advanced help, then in certain menus you receive
additional assistance during voice control operation about the com-
mands which you are able to use. With other commands, the HFCK will
ask you if you really want to complete them.
Activating or deactivating the Audio feedback:
If you activate the audio feedback, during the touch screen operation
you receive voice support (e.g. the phonebook entries are read aloud to
you). Your selection is shown through an information field.
Phone list
Clear list
Pin code
Audio Feedback on
Advanced help on
Voice dial
Settings
Auto connect on
Bluetooth
