95
T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN
Living
6
Lowering the pull-down bed:
Removing any obstacles in the area into which the pull-down bed extends:
Push the seats forwards and rotate, lower backrests, remove or fold cush-
ions if necessary.
Switch off the lamps underneath the pull-down bed.
Turn the key in the key switch (Fig. 121,1) through 90° clockwise. The con-
trol unit (Fig. 121) is activated. Wait until both indicator lamps (Fig. 121,6
and 7) light up in green.
Press the arrow key (Fig. 121,8) and keep it pressed until the bed reaches
the next programmed position below. The green indicator lamp (Fig. 121,7)
is on while the bed is moving.
If necessary, press the arrow key (Fig. 121,8) again to reach the next posi-
tion.
Repeat the procedure until the desired position is reached.
Ensure that the pull-down bed is not resting on obstacles such as head-
rests, cushions or similar.
Lifting the pull-down bed:
Switch off the reading lamps in the pull-down bed.
Turn the key in the key switch (Fig. 121,1) through 90° clockwise. The con-
trol unit (Fig. 121) is activated. Both indicator lamps (Fig. 121,6 and 7) light
up in green.
Press the arrow key (Fig. 121,2) and keep it pressed until the bed reaches
the next programmed position above. The green indicator lamp (Fig. 121,6)
is on while the bed is moving.
If necessary, press the arrow key (Fig. 121,2) again to reach the next posi-
tion.
Repeat the procedure until the desired position is reached.
Ensure that there are no objects stuck between the roof and the pull-down
bed.
Safety plates
The safety plates are only required in the top sleeping position. The safety
plates are located underneath the mattress in the pull-down bed. Remove the
safety plates before using the pull-down bed but do not insert them until per-
sons are already in the pull-down bed.
Z
To prevent accidental incorrect operation, the key can be removed from the
key switch (Fig. 121,1). This necessitates the key being turned anticlock-
wise.
Z
To prevent accidental incorrect operation, the key can be removed from the
key switch (Fig. 121,1). This necessitates the key being turned anticlock-
wise.
Fig. 122 Pull-down bed with safety
plates
Summary of Contents for Ixeo Time IT 590
