![background image](http://html1.mh-extra.com/html/burstner/citycar-2016/citycar-2016_instruction-manual_2833263111.webp)
111
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Care
11
GRP add-on parts should therefore undergo regular follow-up treatment. This
way, these parts will not turn yellow and the sealing of the surface remains
intact.
Follow-up treatment of GRP
add-on parts:
Wash the vehicle and allow to dry as described above. Check if the GRP
add-on parts are clean and dry.
Apply the polisher with a soft cloth evenly on the surface of the GRP add-
on part.
Wait until a light grey film forms.
Wipe the GRP add-on part with a dry, soft cloth. Move the cloth in circles
over the surface of the GRP add-on part.
We recommend using a polishing machine for this work.
11.1.6
Underbody
The underbody of the vehicle is partly coated with an age-resistant underbody
protection. Should the underbody protection be damaged, repair immediately.
Do not treat areas coated with underbody protection with spray oil.
11.1.7
Engine compartment
The body manufacturer excludes any guarantee for damages, leaks, or the
failure or electrical components that appear after an engine washing.
Z
Paint protection has to be used to preserve the polish. Please read the
instructions of the paint protection for details on how to apply it.
Z
Only use products approved by the manufacturer. Our authorised dealers
and service centres will be happy to advise you.
Z
Cleaning and care of the engine compartment may only be carried out
while the ignition is switched on.
Z
Let the engine cool down before carrying out any work in the engine com-
partment. There is a danger of burns when touching motor components
that are still hot!
Z
Before carrying out any work in the engine compartment, read and observe
the corresponding warning and handling instructions in the operating
manual of the base vehicle manufacturer.
Z
Have an engine washing only carried out by an authorised specialist work-
shop.
Z
Do not aim the steam jet directly at the lamp housings, actuators or seals.
This may prevent humidity in the headlights and the defects resulting there-
from.
Z
Do not aim the steam jet at the windscreen wiper motor and the wiper
mechanics.
Z
Only apply protective engine lacquer when the components in the engine
compartment have cooled down and are clean.
Z
Only use lubricants, greases and fluids authorised by the base vehicle
manufacturer.
Summary of Contents for CityCar 2016
