Burstner CityCar 2016, Instruction Manual

Page: 110 / 150

110
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Care
11
11.1.3 Washing the vehicle
„
Wash the vehicle only on a washing site intended for this purpose.
Avoid full sunshine. Observe environmental measures.
„
When using a cleaning agent, observe the manufacturer’s instructions for
use. Cleaning agent must be pH-neutral.
„
First, test the suitability of the cleaning agent on an inconspicuous spot.
„
Only clean external applications and synthetic parts with plenty of warm
water, dish washing liquid and soft cloth.
„
Wash down the vehicle with plenty of water, a clean sponge or a soft brush.
In the case of stubborn dirt add dish washing liquid to the water.
„
Painted exterior walls may also be cleaned with a caravan cleaner.
„
Apply talcum powder to rubber seals on doors.
„
Treat locking cylinder on doors with graphite dust.
11.1.4 Windows of acrylic glass
Acrylic glass windows are delicate and require very careful handling.
11.1.5 Add-on parts made of glass-fibre reinforced plastic (GRP)
GRP add-on parts can turn yellow or become weather-worn due to insufficient
care for the vehicle or ageing of the material.
Z
Never clean the vehicle in the car wash. The brush rollers can damage the
external applications. Water can enter the waste gas vents or the forced
ventilations. The vehicle could be damaged.
Z
Never rub acrylic glass windows dry as dust particles might damage the
surface!
Z
Only clean acrylic glass windows with plenty of warm water, some dish
washing liquid and a soft cloth.
Z
Never use glass cleaning agents with chemical, abrasive or alcohol-con-
taining additives. Premature brittleness of the panes and associated cracks
may result from their use.
Z
Avoid contact of cleansing agents used for the body (e.g. tar- or silicone-
removing agents) with acrylic glass.
Z
Do not clean vehicle in car wash.
Z
Do not attach stickers to the acrylic glass windows.
Z
Having cleaned the vehicle rinse acrylic glass with sufficient clear water.
Z
Apply talcum powder to rubber seals.
Z
An acrylic glass cleanser with antistatic effect is suitable for a follow-up
treatment. Small scratches can be treated with an acrylic glass polish.
These agents are available at the accessories shop.
Z
Avoid contact between polish and window rubber and piping.
Z
The glass-fibre reinforced plastic (GRP) may not become too hot. There-
fore when polishing with a polishing machine, keep the machine in constant
motion.