Burster ForceMaster 9110, Operating Manual

Page: 21 / 95

21
of 95
D
evi
ce
co
nc
ep
t
3.10.4 Entering text and numbers
Text and numbers are input in order to make the settings in some of the menu items.
1
Turn the operating knob to move the cursor to the location in the text that
you want to change.
2
Press the knob in order to select the text location.
3
Turn the operating knob in order to select the letter or the number that you
want.
4
Press the button again in order to confirm the selection.
5
Repeat steps 1 - 4 for every location in the text that you would like to
change.
6
In order to end the text input, move the cursor past the last location on the
line.
"input END?" then appears on the display.
7
Confirm that you are ending the input by pressing the operating knob.
3
When the pressing operation is complete, the numeric display shows "Step
2 set modes“.