14
of 216
2.7 Unpacking
DANGER
Electrical shock hazard
Never switch on the instrument if it shows signs of damage incurred in transit. Only
ever use the instrument under the conditions specified in this operation manual.
Inspect the instrument for damage. If you suspect that the unit has been damaged during shipping, notify
the delivery company within 72 hours.
The DIGIFORCE
®
9311 should be shipped only in its original packaging or in packaging capable of
providing an equivalent degree of protection.
2.8 Warranty
burster praezisionsmesstechnik gmbh & co kg provides a manufacturer's warranty for a period of 24
months after delivery.
Any repairs required during this time will be made without charge. This does not include damage arising
from improper use.
Please note the following when sending the instrument in for repair:
•
If there is a problem with the device, please attach a note to the instrument case
summarizing the fault.
•
Technical specifications subject to change at any time without notice.
We also state explicitly that we do not accept liability for consequential damage.
•
The instrument must always be dispatched in suitable packaging.
2.9 Conversions and modifications
Note:
The warranty shall be deemed void
immediately
if you open or dismantle the DIGIFORCE
®
9311 during the warranty period.
The DIGIFORCE
®
9311 does not contain any parts that are intended to be serviced by the user. Only the
manufacturer's own qualified personnel are permitted to open the DIGIFORCE
®
9311.
It is not permitted to make any changes to the DIGIFORCE
®
9311 without the written agreement of
burster praezisionsmesstechnik gmbh & co kg. burster praezisionsmesstechnik gmbh & co kg does not
accept liability for damages or injury if this condition is disregarded.
Summary of Contents for DIGIFORCE 9311
Page 3: ...3of 216...