Page 31
7.2
Remote control IEEE488 (optionally)
The following list of commands is valid for decades with IEEE488 interface.
The decade performs the following functions based on IEEE488 bus commands.
SH1, AH1, T5, L3, RL1, DC1
The 1427 also recognizes the following general commands:
“DCL”
Device Clear - resets the 1427 to its delivery status
“SDC”
Selected Device Clear - resets the 1427 to its delivery status
“GTL”
Go To Local - disables the remote control
“LLO”
Local Lock Out - disables the local control, the 1427 can only be controlled by remote control.
Other commands are identical to the RS232 interface commands. You’ll find a detailed description at
chapter 7.3 “Commands” and at chapter 7.4 “Command list”.
Figure 6: Plug arrangement IEEE488 Interface
Summary of Contents for 1427
Page 4: ...Page 4...
