BURR KING 960-250 Instruction Manual Download Page 2

 

BURR KING MFG. CO., INC.

 

1220 TAMARA LANE 

WARSAW MO 65355 

WWW.BURRKING.COM 

(660) 438-8998

 

   

 

(800) 621-2748

 

FAX (660) 438-8991

 

 

 

 

June, 2007 

Burr King Manufacturing Company. Inc. warrants the below product to be free in material and workmanship.  The period of warranty is 1 year 

(90 days for vibratory bowls of 20 quart and lesser volume) from the date of purchase.  No warranty is provided for products that have been 
modified, abused, handled carelessly, where repairs have been made or attempted by others, or for freight damage.  No warranty is provided for three 
phase electric motors, controllers, etc. when the motors, controllers are not protected by magnetic starters that were supplied and installed by Burr 
King Manufacturing Company. Inc.  No other warranty, written or verbal is authorized by Burr King Manufacturing Company, Inc.  

 
During the warranty period Burr King Manufacturing Company, Inc (or its authorized suppliers or agents) will replace or repair the below 

product without charge if the product is found by Burr King Manufacturing Company, Inc. to be defective. To receive warranty services you must 
contact Burr King Manufacturing Company, Inc. and receive authorization fir warranty service.  Unless otherwise authorized by Burr King 
Manufacturing Company, Inc.  Products (see * below) must be returned to the factory to receive warranty service.  

 
*Motors, speed controllers, and certain other accessories are warranted by their respective manufactures.  To receive warranty service on these 

items you must contact a brand label service center that supports the product in need of service.  Burr King Manufacturing Company; Inc. will assist 
you in locating a service center.  

 
For the first thirty days after purchase, and when Burr King Manufacturing Company, Inc. authorizes warranty service, we will pay normal and 

necessary surface freight charges both ways (except for items in *).  After thirty days the customer is responsible for all freight charges.  Where 
possible Burr King Manufacturing Company, Inc. may elect to make on site service and/or repairs necessary to return the product to serviceable 
condition. 

 

To assure prompt warranty service it is necessary that you complete and return the below warranty information to Burr King  Manufacturing 
Company, Inc. please 

FAX

 or 

MAIL

 at your convenience. 

 
Product model: _______________________ 

Serial number: _______________________ 

Date Purchased: ______________________ 

Purchased from: ______________________ 

 

 

 

 

Address: ____________________________ 

City: _______________________State/Prov: _________Postal code________ 

 

Your company name: _____________________________________________ 

Address: _____________________________City: _______________________State/Prov: __________Postal code________ 

Phone: _______________________________Fax: _______________________Email: _______________________________ 

Your name: ___________________________Title: _______________________ 

 

How did you learn about Burr King products? 

 

Trade show___Web___Industrial Distributor ___Advertisement ___Other __________________________Which one:________________________ 

What is the intended use of this product? ______________________________________________________________________________________ 

 
Please indicate the general work types performed at your company, check all that apply:    

Fabrication___Machining___Casting__Molding___Welding___Finishing___Assembly___Research___Other___ 
 
Please indicate the primary product focus of your company; check all that apply, 

Aircraft/Missile___Automotive___Contract machine___Contract  Fabrication___ Agricultural____Maintenance___ Recreational___ 

Job shop___Foundry___Construction___Arts___Orthopedic___Dental___Medical___Other_________________________________ 

 

Please tell us what we can do to improve our products: 

________________________________________________________________________________________________________________________

________________________________________________________________________________________________________________________ 

 

May we contact you?  Yes___No___ 

Thank you for purchasing Burr King products!  

Register online @ 

www.burrking.com 

Summary of Contents for 960-250



















Reviews: