The Contractors Choice
thermOweld
®
ECN 2552 REV "H" 03/06/13 34-5657-09
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - CABLE TO REBAR
CRE-16
Place cable in the mold. Cable must sit on top of rebar.
Use locking pliers or a clamp on the rebar below the mold
to prevent it from slipping
when the mold is fired.
Follow
instructions on reverse side
for proper use of copper shim
stock.
CRE-11
Place cable in the mold and butt the rebar against cable.
Follow instructions on reverse side for proper use of copper
shim stock.
CRE-35
Place cable into mold as shown. Follow instructions on
reverse side for proper use of copper shim stock or packing
pad.
CRE-15
Place cable in the mold and butt the rebar against cable.
Follow instructions on reverse side for proper use of copper
shim stock.
