The Contractors Choice
thermOweld
®
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - CABLE TO BAR
CB-2
Place bus bar into mold Tap cable is gapped
1/4" from upper edge of bus bar.
CB-6
Place bus bar into mold Tap cable is gapped 1/4"
from upper edge of bus bar.
◄
CB-3 CB-7
►
Insert end of cable even with upper edge of bus bar.
Pack cable opening with packing material when run bus
is 3" or wider.
CB-4
Butt cable against edge of bus bar
CB-5
Butt tap bus or lug against side of run cable
CB-1
Butt end of cable and lug
under center of tap hole.
CB-29
Place bus bar and cable into mold.
ECN 2552 REV "E" 03/05/13 34-5381-05
