The Contractors Choice
thermOweld
®
ECN 2552 REV "E" 03/06/13 34-5381-75
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS
CABLE TOR AIRCRAFT GROUNDING RECEPTACLE
AC-1
AC-1 weld types are made with the receptacle
in an inverted position. The resulting riser is
then used to position the receptacle on top of
1/2" IPS pipe. Place end of cable to center of
tap hole then place mold onto aircraft grounding
receptacle.
AC-2
AC-2 weld types are made with the receptacle
in an inverted position. The resulting riser is
then used to position the receptacle on top of
1/2" IPS pipe. Place end of cable to center
of tap hole then place mold onto aircraft
grounding receptacle. Do not cut cable.
