manualshive.com logo in svg

burmeier Regia, Instruction Manual

Share
Download
burmeier Regia Instruction Manual Download Page 91

6.3

Replacement parts

Inspection report

Evaluated on:

 

Operator/
Expert:

Signature:

The relevant replacement parts are available from Burmeier, by specifying the item number,
order number and serial number. You will find the necessary details by referring to the type
plate and the PID number, which is located on the mattress base frame at the head end. For
more information, please refer to the chapter 

Part A: Type plate

»

9

 and to the chapter 

Part

A: PID Number

»

11

.

In order to maintain operational reliability and the right to claim under warranty, only original
Burmeier replacement parts may be used! To order replacement parts, or make customer
service requests or other queries, please contact:

Burmeier GmbH & Co. KG

(A Stiegelmeyer-Group company)

Industriestraße 53, 32120 Hiddenhausen

Tel.: +49 (0) 5223 9769 - 0

Fax: +49 (0) 5223 9769 - 090

Email: [email protected]

Maintenance

Part B: Operator and Technical Personnel

55

Summary of Contents for Regia

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands