manualshive.com logo in svg

burmeier Regia, Instruction Manual

Share
Download
burmeier Regia Instruction Manual Download Page 46

3

Assembling the Care Bed

3.1

Included in the package

•

This chapter is intended to be read by professionals employed by the operator or
medical supply retailers.

•

Helpful assembly videos for setting up the bed can be found on
www.burmeier.com/de/information/downloads or
directly on YouTube. Please scan the following QR code with your mobile device:

The bed is delivered unassembled. Two people are required to assemble the bed.

The bed is supplied in the following packaging units:

Package

Contents

Box 1

Chassis with height adjustment motor; handset;
switch mode power supply

Box 2

Mattress base

Box 3

Headboard and footboard

Box 4 and 5

Side panels and/or safety side (split or full-
length)

Remove all packaging materials and cable ties before starting to assemble the bed. Observe
the disposal information in the chapter 

Part B: Disposal

»

66

.

10

Part B: Operator and Technical Personnel

Summary of Contents for Regia

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands