burmeier Regia, Instruction Manual

Page: 42 / 152

2.2.4 Bed adjustment
ATTENTION
If the load is too high, an electronic overload switch is activated and the control unit is
automatically switched off. When the excess load is removed, the drive unit system can
be reactivated by pressing the appropriate button on the handset.
•
When making any adjustments, always ensure that no limbs belonging to the resident,
care staff or other persons, especially playing children, could be trapped underneath the
rests or the mattress base during the adjustment.
•
Do not leave children unsupervised in the room with the bed.
•
Adjustments may then be made only by, or in the presence of, a person who has received
appropriate instruction.
Material damage
Failure to heed this warning may result in the care bed being damaged, which could have
an adverse effect on the loading capacity of the care bed or the adjusting functions.
Ensure that:
•
No obstacles such as bedside cabinets, supply rails, other equipment, chairs or wall pro-
tection rails are in the way,
•
There are no objects lying on the chassis,
•
People should not sit on slightly raised sections of the backrest, thigh rests and leg rests.
Safety Information
6 Part B: Operator and Technical Personnel