burmeier Regia, Instruction Manual

Page: 40 / 152

2.2.1 Electrical cables and connections
WARNING
Risk of injury
Failure to heed this warning may result in fatal injuries due to damaged mains power ca-
bles.
•
Do not use damaged mains power cables! This can lead to electric shock, fire and other
hazards as well as malfunctions.
•
Replace damaged mains power cables immediately!
•
Route the mains cable in such a way that it cannot be pulled, driven over or damaged by
moving parts, or in any other way, when the bed is operated. Before moving the bed, al-
ways make sure that you have unplugged it from the mains supply.
•
Before moving the bed, always make sure that you have unplugged it from the mains
socket.
•
Hang the mains cable in the mains cable holder provided on the headboard to ensure that
it will not fall off or trail on the floor.
•
At weekly intervals when the bed is being used, carry out a visual inspection of the mains
cable to check for damage (scuffing, exposed wires, kinks, pressure points, etc.). A check
should also be performed whenever the cable has been subjected to any mechanical
load, e.g. has been driven over by the bed itself or by an equipment trolley, or whenever
the cable has been bent, stretched or violently pulled, e.g. due to the bed rolling away
while it is still plugged into the mains socket, and before plugging the cable back into the
mains socket whenever the bed has been moved or relocated.
•
Check the strain relief of the power mains cable regularly to ensure that it is securely
fixed.
•
Do not place multiple socket outlets under the bed. This could cause electrical hazards
due to damaged mains cables or penetrating fluids.
•
Do not continue to use the bed if you suspect that the mains cable could be damaged.
Safety Information
4 Part B: Operator and Technical Personnel