manualshive.com logo in svg

burmeier Regia, Instruction Manual

Share
Download
burmeier Regia Instruction Manual Download Page 11

4

Product Description

4.1

Use for the intended purpose

•

This bed was developed as a comfortable solution for caring for persons in need of
care or infirm persons in homes for the elderly, as well as in nursing homes. Further-
more, it was developed as a supporting solution for home care, for infirm, disabled or
frail persons. It it designed to support this care.

•

The use of this care bed in hospitals is only permitted in rooms designed for medical
treatment of the application group 0 (in accordance with DIN VDE 0100 Part 710).

•

Further details on permissible environments for use can be found in chapter 

Part A:

Ambient conditions

»

12

. Further information on possible electromagnetic influences

can be found in the chapter 

Part A: Information on electromagnetic compatibility

(EMC)

»

20

•

This bed must only be used as a single bed.

•

This bed may be intended for care under the supervision of a doctor and be used for
diagnosis, treatment or observation of the resident. It is therefore equipped with a lock-
ing function of the electrical adjustment devices.

•

This bed has no special connectors for potential equalisation. Please pay attention to
this before connecting additional mains-operated (medical) electrical equipment.
If necessary, further advice on additional protective measures can be found:

⁃

In the instruction manuals of these additional mains-operated electrical devices
(e.g. compressed air positioning systems, infusion pumps, enteral feeding devi-
ces, etc.)

⁃

In the DIN EN 60601-1-1 standard (Safety of Medical Electrical Systems)

⁃

In the current issue of the VDE 0107 standard (High-voltage Installations in Hos-
pitals)

•

This bed may be operated without restrictions with a permanent maximum load of 225
kg (resident and accessories).

•

The permitted weight of the resident depends on the total weight of accessories attach-
ed at any time (e.g. respirators, infusions,…)

Weight of accessories (incl. mattress)

Maximum permitted resident weight

10 kg

215 kg

Part A: General Information

5

Summary of Contents for Regia

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands